Influencia de la Morfología Externa de la Raíz de Primeros Premolares Superiores en la Sobreestimación del Espesor Radiográfico Radicular Durante la Preparación para Poste, Evaluados Mediante Tomografía Computarizada Cone Beam / Influence of the External Morphology of the Root of Upper First Premolars on the Overestimation of Radiographic Root Thickness During Post Preparation, Evaluated by Cone Beam Computed Tomography

La investigación tuvo como objetivo determinar la influencia de la morfología externa de la raíz de primeros premolares superiores en la existencia de sobreestimación radiográfica durante la preparación para poste. Con este fin se realizó un estudio transversal in vitro, donde 60 premolares superiores uniradiculares fueron instrumentadas con fresas Gates Glidden y Pesso de calibre 1, 2 y 3. Seguidamente se obtuvieron imágenes radiográficas digitales de cada pieza dentaria mediante un aparato posicionador a una distancia constante en sentido vestíbulo lingual, asimismo se realizaron imágenes tomográficas volumétricas de las muestras. En ambas técnicas imagenológicas se midió el espesor a mesial y distal de las piezas. La sobreestimación fue calculada mediante la diferencia de la medida tomográfica menos la radiográfica. Los resultados indicaron que en ambas paredes radiculares hubo diferencia significativa entre las medidas radiográficas y tomográficas (p<0,05), encontrándose en la pared distal diferencias altamente significativas (p<0,001); además se evidenció que la sobreestimación radiográfica fue mayor en la pared distal. El estudio concluyó que existe sobreestimación radiográfica en premolares superiores durante la preparación para poste de un 20,42 % en promedio, siendo la pared distal la estructura que presenta mayor sobreestimación.

SUMMARY: he investigation´s objective was to determine the influence of external morphology of the root of upper first premolars in the existence of radiographic overestimation during preparation for post. An in vitro cross-sectional study was carried out, where 60 single-rooted upper premolars were instrumented with burs. Gates Glidden and Pesso of caliber 1, 2 and 3, then, digital radiographic images of each dental piece were obtained by means of a positioning device at a constant distance in the buccolingual direction; volumetric tomographic images of the samples were also performed. In both imaging techniques, the mesial and distal thickness of the pieces was measured. The overestimation was calculated by the difference of the tomographic measurement minus the radiographic one. The results indicated that in both root walls there was a significant difference between the radiographic and tomographic measurements (p<0.05), with highly significant differences being found in the distal wall (p<0.001); In addition, it was evidenced that the radiographic overestimation was greater in the distal wall. The study concluded that there is radiographic overestimation in upper premolars during post preparation of 20.42% on average, with the distal wall being the structure that presents the greatest overestimation.

Avaliação da profundidade da cárie proximal nos exames radiográfico convencional e digitalizado / Evaluation of the size of proximal caries in radiography and digitized

Introdução: A cárie dentária é uma doença multifatorial que compreende vários fatores biológicos e sociais. A superfície proximal dos dentes é uma região de difícil visualização que pode esconder pequenas lesões cariosas no esmalte dentário, impossibilitando o diagnóstico através de inspeções visuais e táteis. Objetivo: O objetivo deste trabalho foi avaliar a profundidade da cárie proximal nos exames radiográficos convencionais e digitais, comparando as profundidades das lesões consideradas nestes exames às do exame histológico. Método: Foram utilizados exames radiográficos interproximais de 40 dentes humanos, 20 pré-molares e 20 molares, com alterações clínicas em uma das superfícies proximais, como lesões de mancha branca ou acastanhada e pequenas cavitações. Três profissionais especializados em radiologia odontológica com mais de cinco anos de experiência clínica mediram a profundidade das lesões pelos exames radiográfico e digital das amostras. Para obter os resultados, utilizou-se a técnica de análise de variância (ANOVA). Resultados: Constatou-se um nível de significância de 5% nas mensurações dos exames radiográficos convencionais e digitalizados, mostrando a fidelidade das imagens radiográficas em relação a real profundidade da lesão. Conclusão: Conclui-se que os exames de imagem avaliados foram eficientes na determinação da profundidade das lesões de cárie proximal.

Introduction: Dental caries is a multifactorial disease that comprises several biological and social factors. The proximal surface of the teeth is a region of difficult visualization that can hide small carious lesions in the dental enamel, making diagnosis through visual and tactile inspection infeasible. Objective: The objective of this study was to evaluate the depth of proximal caries in the conventional and digitized radiographic examinations, comparing the depths of the lesions considered in these examinations to those of the histological examination. Method: Interproximal radiographic examinations of 40 human teeth, 20 premolars and 20 molars, with clinical alterations on one of the proximal surfaces, such as white or brown spot lesions and small cavitations, were used. Three professionals specialized in dental radiology with more than five years of clinical experience measured the depth of the lesions by radiographic examination of the samples. To obtain the results, we used the technique of analysis of variance (ANOVA). Results: A level of significance of 5% was found in conventional and digitized radiographic measurements, showing the fidelity of the radiographic images in relation to the actual depth of the lesion. Conclusion: It was concluded that the imaging tests evaluated were efficient in determining the depth of proximal caries lesions.

Anatomical and morphological findings of the root canal of maxillary premolars and their prevalence: CBCT study in a Mexican population / Hallazgos anatómicos y morfológicos del conducto radicular de premolares maxilares y su prevalencia: estudio CBCT en una población mexicana

SUMMARY: An essential prerequisite to perform any dental procedure is a clear understanding and knowledge of dental anatomy and its possible variations. The root canal system is characterized for a complex morphology, which varies among populations, individuals in the same population and even in the same person. The aim of this study was to evaluate by CBCT the morphology, number, curvature, and length of roots of first and second maxillary premolars in a Mexican population. In this stud 1700 maxillary premolars were evaluated by CBCT scans of patients; the axial, sagittal and coronal sections were analyzed following the longitudinal axis of each tooth. As a result 51.60 % of the maxillary first premolars had a single root, 31.03 % had two roots, 16.29 % had root fusion, and 1.07 % had three roots. 22.3 % of the maxillary first premolars showed mesial curvature, 41.9 % had a distal curvature, and 35.7 % did not show any curvature; and the most prevalent configuration in maxillary first premolars was Type V. 88.9 % of the maxillary second premolars had a single root, 3.9 % had two roots, 6.9 % had root fusion, and 0.11 % had three roots; 37.59 % of the maxillary second premolars showed a mesial curvature and 62.40 % showed a distal curvature; and the most prevalent configuration in maxillary second premolars was Type I. The anatomy of the root canal system is extremely complex and has many anatomical configurations, these clinical situations must be considered previous to performing any endodontic treatment.

RESUMEN: Un requisito esencial previo a la realización de cualquier procedimiento dental es una clara comprensión y conocimiento de la anatomía dental y sus posibles variaciones. El sistema de canales radiculares se caracteriza por una morfología compleja, que varía entre poblaciones, individuos en una misma población e incluso en una misma persona. El objetivo de este estudio fue evaluar mediante CBCT la morfología, número, curvatura y longitud de raíces de primeros y segundos premolares maxilares en una población mexicana. En este estudio se evaluaron 1700 premolares maxilares mediante escaneos CBCT de pacientes; se analizaron los cortes axial, sagital y coronal siguiendo el eje longitudinal de cada diente. El 51,60 % de los primeros premolares maxilares tenían una sola raíz, el 31,03 % tenían dos raíces, el 16,29 % tenían fusión de raíces y el 1,07 % tenían tres raíces. El 22,3 % de los primeros premolares maxilares presentaban curvatura mesial, el 41,9 % presentaban curvatura distal y el 35,7 % no presentaban curvatura alguna; y la configuración más prevalente en primeros premolares maxilares fue el Tipo V. El 88,9 % de los segundos premolares maxilares tenían una sola raíz, el 3,9 % dos raíces, el 6,9 % fusión de raíces y el 0,11 % tres raíces; El 37,59 % de los segundos premolares maxilares presentaban curvatura mesial y el 62,40 % curvatura distal y la configuración más prevalente en segundos premolares maxilares fue el Tipo I. La anatomía del sistema de canales radiculares es extremadamente compleja y tiene muchas configuraciones anatómicas, estas situaciones clínicas deben ser consideradas antes de realizar cualquier tratamiento de endodoncia.

Root and root canal system morphology of maxillary first premolars in a Chilean subpopulation: a cone-beam Computed Tomography Study / Morfología radicular y del sistema de canales radiculares de los primeros premolares maxilares en una subpoblación chilena: un estudio de tomografía computarizada de haz de cono

SUMMARY: The maxillary first premolar (MFP) presents a highly variable and complex root morphology; it is also one of the teeth most likely to suffer vertical root fractures. The aim of this study was to describe the morphology of the root and root canal system of the MFP in a Chilean population using Cone-Beam Computed Tomography (CBCT). One hundred and twenty-one MFP were evaluated (60 left and 61 right), belonging to subjects of both sexes. Descriptive and statiscal analysis of the data was carried out, with a value of P < 0.05 being statistically significant. One root was observed in 71 % of teeth and two roots in 29 %; statistically significant differences were observed in the number of roots by sex (p<0.05). Two root canals were found in 69.5 % of teeth and one canal in 30.5 %. In terms of morphological classification, 41.3 % of cases were Vertucci Type IV. The proximal cementodentinal walls were the thinnest. The MFP presented a high degree of morphological variation in a Chilean subpopulation.

RESUMEN: El primer premolar maxilar (PPM) presenta una morfología radicular muy variable y compleja; también es uno de los dientes con mayor probabilidad de sufrir fracturas radiculares verticales. El objetivo de este estudio fue describir la morfología de la raíz y el sistema de conductos radiculares del PPM en una población chilena mediante tomografía computarizada de haz cónico (CBCT). Se evaluaron 121 PPM (60 izquierdas y 61 derechas), pertenecientes a sujetos de ambos sexos. Se realizó un análisis descriptivo y estadístico de los datos, siendo estadísticamente significativo un valor de P < 0,05. Se observó una raíz en el 71 % de los dientes y dos raíces en el 29 %; se observaron diferencias estadísticamente significativas en el número de raíces por sexo (p<0.05). Se encontraron dos conductos radiculares en el 69,5 % de los dientes y un conducto en el 30,5 %. En cuanto a la clasificación morfológica, el 41,3 % de los casos fueron Vertucci Tipo IV. Las paredes cementodentinales proximales fueron las más delgadas. El PPM presentó un alto grado de variación morfológica en una subpoblación chilena.

Mandibular pre-molars endodontic anatomy and role in sex dimorphism for Western Asia population using CBCT 3d imaging technique / Anatomía endodóntica de premolares mandibulares y papel en el dimorfismo sexual para la población de Asia Occidental utilizando la técnica de imagen 3d CBCT

SUMMARY: Cone Beam Computerized Tomography (CBCT) imaging technique can be used for identifying the root canal anatomy and its use in determining sexual dimorphism. The aim of current study was to identify the commonly found root canal morphology and gender dimorphism for mandibular pre-molars in Western Asia population according to Vertucci's classification using CBCT 3D imaging technique. On ethical approval 470 patients from Western Asia population with intact healthy mandibular first and second pre-molars were included in the study. The selected patients were sent to radiology department of Riyadh Elm University, Saudi Arabia for CBCT images. The observations recorded included: i) number of roots; and ii) type of root canal morphology based on Vertucci's classification. All the mandibular first and second pre-molars had single root both in males and females. The type of Vertucci's classification commonly observed was Type I both in males (88.94 %) and females (100 %) in mandibular first pre-molars. Similarly Type I was identified as a common root canal configuration in mandibular second pre-molars for males (82.77 %) and females (100 %). The two canal configurations Type IV and V were only observed in the males. It can be concluded from the results mandibular first and second pre-molars in the Western Asia population are single rooted with common Vertucci's Type I canal configuration in the females with rare evidence of two canals in males. Additionally CBCT is an effective technique and should be used for detection of root canals in the mandibular pre-molars which can aid dentists in providing a successful endodontic therapy.

RESUMEN: La imagen de la tomografía computarizada de haz cónico (CBCT) se puede utilizar para identificar la anatomía del conducto radicular y para determinar el dimorfismo sexual. El objetivo del estudio fue identificar la morfología del conducto radicular y el dimorfismo de sexo, comúnmente encontrados en los premolares mandibulares en la población de Asia occidental, de acuerdo con la clasificación de Vertucci, utilizando la técnica de imágenes CBCT 3D. Tras la aprobación ética, se incluyeron en el estudio 470 pacientes de la población de Asia occidental con primeros y segundos premolares mandibulares sanos intactos. Los pacientes seleccionados fueron enviados al departamento de radiología de la Universidad de Riyadh Elm, Arabia Saudita, para las imágenes CBCT. Las observaciones incluyeron: i) número de raíces; y ii) tipo de morfología del conducto radicular según la clasificación de Vertucci. Se observó solamente una raíz en los primeros y segundos premolares mandibulares tanto en hombres como en mujeres. El tipo de clasificación de Vertucci comúnmente observado fue Tipo I tanto en hombres (88,94 %) como en mujeres (100 %) en los primeros premolares mandibulares. El Tipo I se identificó como una configuración común del conducto radicular en los segundos premolares mandibulares para hombres (82,77 %) y mujeres (100 %). Ambas configuraciones de canal Tipo IV y V solo se observaron en los varones. Se puede concluir a partir de los resultados de los primeros y segundos premolares mandibulares en la población de Asia occidental, que éstos tienen una sola raíz con una configuración de canal de Vertucci Tipo I común en mujeres con una evidencia de dos canales infrecuente en los hombres. La CBCT es una técnica eficaz y debe usarse para la detección de conduc- tos radiculares en los premolares mandibulares, lo que puede ayu- dar a los dentistas a proporcionar una terapia endodóntica exitosa.

Root anatomy and canal configuration of maxillary premolars: a cone-beam computed tomography study / Anatomía de la raíz y configuración del conducto de los premolares maxilares: estudio de tomografía computarizada de haz cónico

SUMMARY: The aim of the study was to determine the number and anatomical configuration of roots and root canals of maxillary first and second premolars using cone-beam computed tomography scans. n273 CBCT scans were evaluated, obtaining a sample of 592 maxillary premolars. Root number and root canal anatomy were categorized using Ahmed´s classification. Data was analyzed using Pearson's Chi-squared test. Two roots were present on 157 first premolars, one root in 132 premolars and three roots in 17. Second premolars presented one root in 266 samples and two roots in 20; no second premolars presented three roots. Eight different configurations were found; the most frequent was 2MP B1 P1 in first premolars (51,3 %) and 1MP1 (63.6 %) in second premolars. The most frequent morphology found in maxillary premolars in Chilean population was two and three roots. The analysis of internal anatomy using CBCT revealed a highly variable distribution of root canals, generally of low to medium complexity, similar to what is found in other ethnic groups.

RESUMEN: El objetivo de este estudio fue determinar el número y la configuración de raíces y canales radiculares de primeros y segundos premolares maxilares utilizado tomografía computacional de haz cónico. 273 TCHC fueron evaluados, obtenido una muestra de 592 premolares maxilares. El número de raíces y la anatomía de los canales radiculares fueron categorizados utilizando la clasificación de Ahmed. Los datos fueron analizados con la prueba Chi- Cuadrado de Pearson. Dos raíces fueron observadas en 157 primeros presentaron una raíz en 266 muestras y dos raíces en 20; no se encontraron tres raíces en segundos premolares. Ocho diferentes configuraciones fueron encontradas; siendo la más frecuente 2MP B1 P1 en primeros premolares (51,3 %) y 1MP1 (63,6 %) en segundos premolares. La morfología radicular más frecuentemente encontrada en premolares de población Chilena fue de dos y tres raíces. El análisis de la anatomía interna usando TCHC mostró una gran variabilidad de en la distribución de los canales radiculares. Generalmente de mediana y baja complejidad como los encontrados en otros grupos etnicos.

Factors affecting the stability of maxillary extraction site closure

ABSTRACT Introduction: A side effect observed in cases treated with extractions is the instability of orthodontic space closure. Objective: The aim of this study was to investigate the influence of gingival invagination, presence of third molars and facial pattern, on the stability of orthodontic space-closure in the maxillary arch. Methods: Ninety-nine subjects (41 male and 58 female) with Class I malocclusion treated with four premolars extraction were evaluated. Extraction sites reopening and gingival invaginations were evaluated in scanned dental models in the posttreatment and 1-year posttreatment stages (mean age 16.1 years). Third molars presence was evaluated at 1-year posttreatment panoramic radiographs, and the facial pattern (SN.GoGn) was evaluated in the initial lateral headfilms. Multiple logistic regression analysis was used to estimate the influence of the aforementioned independent variables on the frequency of extraction space reopening. Results: Space reopening was observed in 20.20% of the subjects 1-year post-debonding. Gingival invaginations were present in 25.73% of quadrants after debonding and in 22.80% 1-year posttreatment. The mean pre-treatment SN.GoGn was 35.64 degrees (SD=5.26). No significant influence was observed of the three independent variables on the instability of extraction site closure. Conclusions: The presence of gingival invaginations, third molars and facial growth pattern do not seem to influence maxillary extraction sites reopening.

RESUMO Introdução: Um efeito colateral observado nos casos tratados com extrações é a instabilidade do fechamento ortodôntico do espaço. Objetivo: O objetivo do presente estudo foi investigar a influência da invaginação gengival, da presença de terceiros molares e do padrão facial na estabilidade do fechamento ortodôntico dos locais de extração na arcada superior. Métodos: Noventa e nove indivíduos (41 homens e 58 mulheres) com má oclusão de Classe I tratados com extração de quatro pré-molares foram avaliados. A reabertura dos locais de extração e as invaginações gengivais foram avaliadas nos modelos dentários digitalizados nos estágios pós-tratamento e um ano pós-tratamento (idade média de 16,1 anos). A presença dos terceiros molares foi avaliada em radiografias panorâmicas de um ano pós-tratamento, e o padrão facial (SN.GoGn) foi avaliado nas radiografias laterais iniciais. Análise de regressão logística múltipla foi utilizada para estimar a influência das variáveis independentes citadas na frequência de reabertura do espaço de extração. Resultados: A reabertura do espaço foi observada em 20,20% dos sujeitos um ano após a remoção do aparelho. Invaginações gengivais estiveram presentes em 25,73% dos quadrantes após a remoção do aparelho e em 22,80% após um ano pós-tratamento. O SN.GoGn pré-tratamento médio foi de 35,64 graus (DP = 5,26). Não foi observada influência significativa das três variáveis independentes sobre a instabilidade do fechamento do local de extração. Conclusões: A presença de invaginações gengivais, terceiros molares e padrão de crescimento facial não parece influenciar na reabertura dos locais de extração maxilar.

Primer premolar inferior con dos conductos y doble trayecto fistuloso: caso clínico / First lower premolar with two canals and double fistulous path: a clinical case

El tratamiento endodóntico del primer premolar inferior, cuando presenta varios conductos o varias raíces puede ser un gran desafío. En el presente trabajo se describe un caso clínico de un paciente de sexo masculino de 60 años de edad que concurre al Servicio de Guardia de la Facultad de Odontología de la Universidad de Buenos Aires (FOUBA). Al examen clínico y radiográfico se descubre la presencia de dos trayectos fistulosos que corresponden a la misma pieza dentaria con diagnóstico de absceso alveolar crónico. Concluimos que el operador debe realizar un minucioso diagnóstico, y analizar y conocer las diferentes configuraciones anatómicas para tratarlas adecuadamente, aumentando así las probabilidades de éxito del tratamiento (AU)

Endodontic treatment of the first lower premolar when it has multiple ducts or multiple roots can be a challenge. This paper describes a clinical case of a 60-year-old male patient who attends the on-call service of the School of Dentistry of the University of Buenos Aires (FOUBA). Upon clinical and radiographic examination, the presence of two sinusal tracts that corresponded to the same dental piece with a diagnosis of chronic alveolar abscess was discovered. We conclude that the operator must carry out a thorough diagnosis and analyze and understand the different anatomical configurations in order to properly treat them, thus increasing the probability of treatment success (AU)

Morphological analysis of maxillary first premolars by cone beam computed tomography in a Chilean sub-population / Análisis morfológico de primeros premolares maxilares a través de tomografía computarizada de haz cónico en una subpoblación chilena

SUMMARY: The root canal system of the maxillary first premolar (MFP), present a high rate of variation, especially at apical level. This complicates the action of antiseptic solutions and endodontic instruments at this level. The object of this in vivo study was to analyse by Cone Beam Computed Tomography (CBCT) the radicular and canalicular morphology of MFP in a Chilean sub-population. We carried out a cross sectional, descriptive and observational in vivo study with CBCT examinations of 70 MFP, both left and right. The data were analysed using descriptive statistics (mean (M), standard deviation (SD), with a confidence interval of 95 %), and one-factor ANOVA was used to relate the sections observed. Tooth 1.4 presented one root in 64.86 % of cases and two roots in 35.15 %. Tooth 2.4 presented one root in 66.67 % of cases and two roots in 33.33 %. The frequency of one and two canals was observed to be 30 % and 70% respectively. The walls with the smallest cementodentinal thickness were the mesial (1.11±0.55) and distal (1.08±0.52). The thickest dentinal wall was the palatine (2.07±1.29), followed by the buccal (1.6±1.0). No statistical differences between males and females were found in the thickness of the root wall, nor in the location of the premolar in the maxilla (p>0.05). In conclusion, the root morphology of the MFP is highly variable. Care must be taken not to over-instrument the proximal walls to avoid perforations or fractures. CBCT has proved to be a useful and effective diagnostic tool for in vivo study of dental morphology.

RESUMEN: El sistema de canal radicular del primer premolar maxilar (MFP) presenta una alta tasa de variación, especialmente a nivel apical. Esto complica la acción de las soluciones antisépticas y los instrumentos endodónticos a este nivel. El objetivo de este estudio in vivo fue analizar mediante tomografía computarizada de haz cónico (CBCT) la morfología radicular y canalicular de la MFP en una subpoblación chilena. Realizamos un estudio transversal, descriptivo y observacional in vivo con exámenes CBCT de 70 MFP, tanto a la izquierda como a la derecha. Los datos se analizaron mediante estadística descriptiva (media (M), desviación estándar (DE), con un intervalo de confianza del 95 %) y se utilizó ANOVA de un factor para relacionar las secciones observadas. El diente 1.4 presentó una raíz en el 64,86% de los casos y dos raíces en el 35,15 %. El diente 2.4 presentó una raíz en el 66,67 % de los casos y dos raíces en el 33,33 %. Se observó que la frecuencia de uno y dos canales era del 30 % y 70%, respectivamente. Las paredes con el espesor cementodentinal más pequeño fueron mesial (1,11 ± 0,55) y distal (1,08 ± 0,52). La pared dentinaria más gruesa fue la palatina (2,07 ± 1,29), seguida de la vestibular (1,6 ± 1,0). No se encontraron diferencias estadísticas entre machos y hembras en el grosor de la pared de la raíz, ni en la ubicación del premolar en el maxilar (p> 0,05). En conclusión, la morfología de la raíz de la MFP es muy variable. Se debe tener cuidado de no sobre-instrumentar las paredes proximales para evitar perforaciones o fracturas. CBCT ha demostrado ser una herramienta de diagnóstico útil y efectiva para el estudio in vivo de la morfología dental.

Accuracy of cone-beam computed tomography in measuring the thickness of radicular dentin

Abstract The purpose of this study was to evaluate the accuracy of Cone-Beam Computed Tomography (CBCT) in measuring radicular dentin thickness focused on intraradicular post placement planning treatment. Ten single-rooted human premolars were selected. The teeth were divided into three segments (cervical, middle and apical). The coronal face of the apical and middle sections was selected for the dentin thickness assessment; which was measured from the external root surface to the root canal wall, on the buccal, lingual, mesial, and distal surfaces of each tooth. In situ anatomical measurement was the reference standard, and the corresponding axial CBCT imaging were evaluated by the i-CAT software. The one-way ANOVA test and the Bonferroni post hoc test were applied to compare the groups (p>0.05). CBCT imaging measurements (p=0.003) overestimated the radicular dentin thickness compared to the reference standard. Descriptive analysis showed that the greatest difference between the reference standard and the tomographic measurement means were 0.20 mm. One-way ANOVA test found the statistical significant difference among group's measurements. Bonferroni correction demonstrated statistically significant difference only related lingual surface for the CBCT imaging measurements. CBCT imaging measurements overestimated the radicular dentin thickness. However, the measurement difference was clinically acceptable.

Resumo O objetivo deste estudo foi avaliar a precisão da Tomografia Computadorizada de Feixe Cônico (TCFC) na mensuração da espessura da dentina radicular no planejamento de tratamento envolvendo a cimentação de pinos intrarradiculares. Dez pré-molares humanos unirradiculares foram selecionados. Os dentes foram divididos em três segmentos (cervical, médio e apical). A face coronal dos terços apical e médio foi selecionada para a avaliação da espessura da dentina; que foi medida a partir da superfície externa da raiz até a parede do canal radicular, nas superfícies vestibular, lingual, mesial e distal de cada dente. A medida anatômica in situ foi o padrão de referência, e a imagem de TCFC axial correspondente foi avaliada pelo software i-CAT. O teste de 1-fator ANOVA e o teste post hoc de Bonferroni foram aplicados para comparar os grupos (p>0,05). As medidas de imagem da TCFC (p=0,003) superestimaram a espessura da dentina radicular em comparação a referência padrão. A análise descritiva mostrou que a maior diferença entre a referência padrão e a medida tomográfica foi de 0,20 mm. O teste ANOVA encontrou a diferença de significância estatística entre as medidas do grupo. A correção de Bonferroni demonstrou diferença estatisticamente significante apenas relacionada às medidas de imagem da TCFC. A medida de imagem da TCFC superestimou a espessura da dentina radicular. No entanto, a diferença de medição foi clinicamente aceitável.

Empleo de Biodentine como alternativa para el tratamiento de perforaciones radiculares: informe de un caso clínico / The use of Biodentine for root perforation therapy: report of a clinical case

Objetivo: Presentar un caso clínico de dos premolares inferiores con perforación radicular iatrogénica obturadas con Biodentine. Caso clínico: Una paciente de 54 años de edad fue derivada para realizar el tratamiento endodóntico en las piezas dentarias 44 y 45. Los exámenes clínico y radiográfico revelaron la presencia de perforaciones radiculares, cuya localización fue confirmada por medio de una tomografía computarizada de haz cónico. Luego de la desinfección y la instrumentación de los conductos radiculares, ambas perforaciones fueron selladas con Biodentine. Finalmente, los conductos fueron obturados, y las cavidades de acceso, restauradas con resina compuesta. Una semana después los dientes se encontraban asintomáticos y sin tumefacción. La paciente fue controlada nuevamente a los 20 meses postratamiento. Al examen clínico, ambos dientes estaban asintomáticos y funcionales. No hubo signos de infección, inflamación o sensibilidad a la percusión y la palpación. Las imágenes radiográficas y tomográficas revelaron espacio periodontal y cortical ósea normales. Conclusión: En el presente caso clínico, el Biodentine resultó un material adecuado para la obturación de perforaciones radiculares de origen iatrogénico ubicadas en la unión de los tercios medio y coronal (AU)

Aim: To present a clinical case of two lower premolars with iatrogenic root perforations in which both defects were repaired with Biodentine. Clinical case: A healthy 54-year old female was referred for endodontic treatment of teeth number 44 and 45. Clinical and radiographic examination revealed the presence of root perforations whose buccal localization was confirmed by a cone beam computed tomography scan. After the root canals were instrumented, both perforations were filled with Biodentine. The canals were obturated and the endodontic accesses were restored. A week later, the teeth were asymptomatic and without the presence of swelling. The patient was recalled 20-months after treatment and both teeth were asymptomatic and functional with no signs of infection, inflammation or sensitivity to percussion and palpation. Radiograph and cone beam computed tomography images showed a normal periodontal width and an intact lamina dura. Conclusion: Based on the outocome of this clinical case, Biodentine was an adequate material to repair iatrogenic root perforations (AU)

Vestibular Alveolar bone height measurement: Accuracy and Correlation between direct and indirect techniques / Medición de la altura del hueso alveolar vestibular: precisión y correlación entre técnicas directa e indirecta

ABSTRACT Cone Beam Computed Tomography (CBCT) has modified the perspective of dentistry images, providing manipulable threedimensional images with a 1:1 patient:image ratio. Treatments and diagnosis are modified or corroborated by CBCT; however, its accuracy in thin structures such as cortical bone has been subjected to critical review. The aim of this study is to correlate the measurement of vestibular alveolar bone height using direct measurements and measurements performed with conebeam tomographic images with standard (SD) voxel resolution. Thirty incisor and premolar teeth of patients undergoing open curettage were measured with a highprecision caliper and with Cone Beam Computed Tomography (CBCT) at an SD resolution of 0.16 mm voxels in a 3D Orthophos XG Sirona scanner. Intraobserver evaluation was performed using the intraclass correlation coefficient (ICC). Direct measurements and CBCT measurements were correlated using Pearson correlation (PCC). The mean difference between indirect and direct measurements was 3.15 mm. Paired t test and Pearson Correlation coefficient determined that all measurements differed statistically from each other with p<0.05. With the CT scanner and protocol used in this study, CBCT images do not enable accurate evaluation of vestibular alveolar bone height.

RESUMEN La tomografía de haz cónico (CBCT) ha modificado la perspectiva de la imagenología en odontología que brinda una imagen tridimensional manipulable con una relación 1:1, paciente: imagen. Los tratamientos y diagnósticos se ven modificados o corroborados por el CBCT; sin embargo, la exactitud que presenta en estructuras delgadas como las corticales óseas ha sido sometida a críticas. El objetivo fue correlacionar la medición de la altura del hueso alveolar vestibular mediante mediciones directas y las realizadas con imágenes tomográficas de haz cónico con resolución de vóxel estándar (SD). Treinta dientes incisivos y premolares de pacientes sometidos a un curetaje abierto se midieron con un calibrador de alta precisión y una tomografía computarizada de haz cónico (CBCT) a una resolución SD de 0,16 mm de vóxeles en un escáner 3D Orthophos XG Sirona. La evaluación intraobservador se realizó utilizando el coeficiente de correlación intraclase (ICC), y las mediciones directas y las mediciones CBCT se correlacionaron utilizando la correlación de Pearson (PCC). La diferencia media entre las mediciones indirectas y directas fue de 3,15 mm. La prueba t pareada y el Coeficiente de Correlación de Pearson determinaron que todas las mediciones fueron estadísticamente diferentes entre sí con una p <0.05. Con el escáner de TC y el protocolo utilizado en este estudio, las imágenes CBCT no permiten una evaluación precisa de la altura del hueso alveolar vestibular.

Estimación de la edad dental en adultos mediante análisis de relación de área pulpa/diente en premolares y caninos mandi bulares mediante ortopantomografías, en una muestra chilena / Dental age estimation in adults by pulp/tooth ratio in lower premolars and canines by orthopantomographs, in a Chilean sample

La estimación de la edad es uno de los procedimientos más importantes para la identificación humana. Cameriere et al. propusieron un método para estimación de edad evaluando la relación área pulpa/diente utilizando radiografías dentales, basado en la aposición de dentina secundaria. El objetivo de este estudio, fue desarrollar modelos de regresión lineal para la estimación de la edad, mediante la relación de área pulpa/diente en caninos y premolares mandibulares utilizando ortopantomografías (OPGs) en una población chilena de individuos adultos de edad y sexo conocidos. Se analizaron 162 OPGs digitales (67 hombres y 95 mujeres) mediante el programa ImageJ, con el fin de medir las áreas señaladas. Mediante análisis de regresión, se estudiaron las posibles interacciones entre la edad, sexo y relación de área pulpa/diente. Esta relación disminuyó regularmente con la edad y varió de 0,03 a 0,6 para premolares y 0,04 a 0,6 para caninos respectivamente. El mejor modelo de estimación de edad fue para la relación del canino inferior izquierdo obteniendo un coeficiente de determinación de R2=8,7 %. La media de error absoluto, con un intervalo de confianza del 95 %, osciló entre 5,6 y 5,72 años. El análisis de ANCOVA no mostró diferencias significativas entre hombres y mujeres para la estimación de edad, al igual que para ambos lados de la cavidad oral. Según los resultados obtenidos, la relación de área pulpa/diente es una metodología fiable para la estimación de la edad en adultos. Sin embargo, los resultados demuestran que, en casos reales, es necesario contar con métodos adicionales de estimación ya que, al menos en la muestra analizada, el ajuste indicado por los coeficientes de determinación demostró falta de certeza en las estimaciones etarias producidas por los modelos de regresión lineal.

Age estimation is one of the most important procedures for human identification. Cameriere et al. proposed a method for age estimation based on the analysis of the pulp/tooth ratio by using dental x-rays, based on the apposition of secondary dentine. The objective of this study was to develop linear regression models for age estimation, by means of the pulp/tooth ratio of mandibular canines and premolars using orthopantomographies (OPGs) in a Chilean population of adults of known age and sex. We analyzed 162 digital OPGs (67 men and 95 women) through ImageJ software, in order to measure these areas. By means of regression analysis, the possible interactions between age, sex and pulp / tooth ratio were studied. This relationship decreased regularly with age and ranged from 0.03 to 0.6 for premolars and 0.04 to 0.6 for canines, respectively. The best model of age estimation was for the relation of the lower left canine, obtaining a coefficient of determination of R2=8.7 %. The mean absolute error, with a confidence interval of 95 %, ranged between 5.6 and 5.72 years. The ANCOVA analysis showed no significant differences between men and women for age estimation, as well as for both sides of the oral cavity. According to the results, the pulp/tooth ratio is a reliable methodology for estimating age in adults. However, the results showed that, in actual cases, it is necessary to use additional estimation methods since, at least in the sample analyzed, the adjustment indicated by coefficients of determination showed uncertainty in age estimation produced by the linear regression models.

Assessment of maxillary premolar region in relation to maxillary sinus floor and buccal bone plate: a cone beam computed tomography study / Evaluación de la región premolar maxilar en relación con el piso del seno maxilar y la tabla osea vestibular: estudio de tomografía computarizada de haz cónico

The maxillary sinus floor location and the buccal bone plate are factors to be considered in the long-term success with implant treatments mainly in the premolar region. the aim of this study was to establish morphometric characteristics of the buccal cortical bone (BCB) thickness of maxillary premolars and its relation to maxillary sinus floor through CBCT. In this study 350 first and second maxillary premolars were analyzed from 110 CBCT images and the buccal cortical bone (BCB) was measured in a coronal view at the major axis level of each premolar. In addition, in 200 first and second maxillary premolars CBCT images were measured the distance from premolar apex to maxillary sinus floor (MSF) in both frontal and sagittal plane. The type of relationship between the apex and MSF was classified according to Ok et al. (2014). The second premolar was observed with higher values of BCB (p<0.001). In first premolar, higher values were observed in the male sex (p>0.05). In second premolar, only significantly higher values were observed in the male sex in MA-MB-MC (p>0.05). Regarding to MSF and its relation to premolar roots, it was observed that 10 % of the sample was classified as type I, 19 % as type II, 55.5 % as type III and 15.5 % as type IV. The BCB of the upper premolar region is thicker in the apical region and decreases toward the coronal region. Almost 50 % of apex of second premolars are closely and risky related MSF (Type I and II).

La localización del piso del seno maxilar (PSM) y la tabla ósea vestibular (TOV) son factores a considerar en el éxito a largo plazo de los tratamientos de implante dental en la región premolar. El objetivo de este estudio fue establecer características morfométricas del grosor de la TOV en los premolares maxilares y su relación con el PSM a través de CBCT. Se analizaron 350 primeros y segundos premolares en 110 CBCT y la TOV fue medida en vista coronal en el eje axial mayor de cada premolar. Además en 200 primeros y segundos premolares maxilares se midió la distancia desde el ápice del diente hasta el PSM en el plano sagital y frontal. El tipo de relación entre el ápice y el PSM se clasificó según Ok et al. (2014). El Segundo premolar obtuvo los mayores valores de grosor de TOV (p<0.001). En primeros premolares se observaron valores altos en el género masculino (p>0.05). En segundos premolares solo se encontraron valores significativamente altos en el género masculino en MA-MB-MC (p>0.05). En la relación con el PSM y ápices de raíces de premolares, el 10% de la muestra se clasificó como tipo I, el 19% como tipo II, el 55,5% como tipo III y el 15.5% como tipo IV. En conclusión la TOV de la región premolares superior es más grueso en la zona apical, decreciendo hacia la zona coronal. Alrededor del 50% de los ápices de raíces de premolares maxilares están cercanas y en relación de riesgo con el PSM (tipo I y II).

Root canal morphology of the mandibular first premolars in a Yucatecan population using cone beam computed tomography: an in vitro study / Morfología del conducto radicular de primeros premolares mandibulares en una población yucateca usando tomografía computarizada: estudio in vitro

A successful endodontic treatment requires knowledge of the internal configuration of dental root canals. Most of the people who live in Yucatan are of Maya origin, characterized by a Mongoloid dental pattern. Because of their ethnicity, variations are expected. The purpose of this investigation is to assess the morphological characteristics and variability of this population. One hundred and five extracted first mandibular premolars of Mexican Maya population were analyzed; the sample was obtained from the Oral Surgery Clinic in the School of Dentistry at the Autonomous University of Yucatan with written informed consent. Analyses were performed by means of Cone Beam Computed Tomography. Vertucci´s Type I was the most prevalent configuration with 51.4 %, but 41 cases (39.1 %) presented a radicular groove and a C-shaped canal configuration. Overall, we documented 1, 2, 3, and 4 root canals. Mandibular first premolars are very variable in the Yucatecan population. The variability and frequency of C-shape is similar to mandibular second molars confirming the importance of the ethnic background for the endodontic treatments.

El éxito en el tratamiento endodóntico requiere el conocimiento profundo de la configuración interna del sistema de conductos radiculares. La mayoría de las personas que viven en Yucatán son de origen Maya y poseen el patron dental Mongoloide; por lo tanto, se esperan variaciones debido a su etnicidad. El propósito de esta investigación fue evaluar las características morfológicas y la variabilidad del conducto radicular en la población yucateca. Se analizaron ciento cinco primeros premolars mandibulares extraídos de pacientes provenientes de una muestra Maya mexicana; la muestra fue obtenida de la Clínica de Cirugía Oral de la Facultad de Odontología de la Universidad Autónoma de Yucatán. Con consentimiendo informado escrito. Se utilizaron Tomografías Computarizadas para el análisis de la muestra. La configuración más prevalente fue la Tipo I de Vertucci con 51,4 %. Sin embargo, 41 de 105 casos (39,1 %) presentaron un surco radicular y la configuración en forma de "C". Se documentaron casos con 1, 2, 3 y 4 conductos radiculares. Los primeros premolares mandibulares de la población Yucateca son muy variables. La variabilidad y frecuencia de conductos en forma de "C" concuerda con estudios realizados en segundos molars mandibulares en esta zona confirmando la importancia del origen étnico de las poblaciones para los tratamientos endodónticos.

Сross-sectional anatomic study of direct positional relationships between mandibular canal and roots of posterior teeth using cone beam computed tomography

Objectives: to establish the frequency of the various types of direct contacts of the root apices with the wall of the mandibular canal and to determine gender differences in number of such contacts in a selected belarusian population using cone beam computed tomography. methodology: one hundred and two cone beam computed tomography scans were analyzed to classify the types of contact and three-dimensional relationship between the mandibular teeth and the mandibular canal. results: the direct contact between the teeth and the mandibular canal was observed in 63.7 percent of patients. overall 300 roots of 189 teeth were in direct contact with the mandibular canal: 9.3 percent were second premolars, 14.7 percent were first molars, 33.8 percent were second molars and 50.0 percent were third molars. there were no statistically significant differences in the number of teeth with direct contact with the mandibular canal between males and females. conclusion: the direct contact of the root apices with the mandibular canal was most often found in the second and third molars. the root apices of the third molars had the greatest variability of location relatively to the mandibular canal.

Do premolar extractions necessarily result in a flat face? No, when properly indicated

Abstract The esthetic benefits are among the main goals of orthodontic treatment; therefore, tooth extractions have been avoided as a protocol for orthodontic treatment because they may impair the facial profile. The present article discusses aspects as the magnitude and response of soft tissue profile due to changes in incisor positioning, and the effect of different sequences of premolar extraction. One case report illustrates the subject, with favorable and stable esthetic and occlusal outcomes five years after orthodontic treatment with extraction of second premolars.

Resumo Os benefícios estéticos estão entre os principais objetivos do tratamento ortodôntico. Por isso, as extrações dentárias têm sido evitadas como protocolo de tratamento ortodôntico, pois podem prejudicar o perfil facial. No presente artigo, serão discutidos aspectos como a magnitude da resposta do perfil de tecidos moles em decorrência das mudanças na posição dos incisivos e os efeitos de diferentes sequências de extrações de pré-molares. Um caso clínico ilustrará o tema, com resultados estéticos e oclusais favoráveis e estáveis cinco anos após o tratamento ortodôntico com extrações de segundos pré-molares.

Prevalence of hypercementosis in a saudi arabian population: a cone beam computed tomography study

Objective: to determine the prevalence of hypercementosis in a Saudi Arabian population. material and methods: a total of 642 CBCT scans from patients comprising 4471 teeth were incorporated in the study sample. all teeth were analyzed for the presence of hypercementosis in sagittal, axial and coronal plains by two qualified and experienced observers. the characteristics of the involved tooth in terms of gender, jaw and location were recorded from the CBCT scans. the obtained data were statistically analyzed using SPSS 21.0. the reliability of measurements was evaluated by kappa statistics. results: out of total 642 subjects hypercementosis was observed in 31 patients (4.82 percent) and 43 teeth (0.96 percent). Eight (2.68 percent) maxillary 1st molars, 6 (1.88 percent) mandibular 1st molars, 5 (1.46 percent) maxillary second molars, 7 (1.95 percent) mandibular 2nd molars, 9 (4.76 percent) maxillary 3rd molars and 8 (3.58 percent) mandibular 3rd molars were observed to have hypercementosis. among males, 4.76 percent were affected with hypercementosis as compared to 4.86 percent of females (p=0.97). likewise, no significant difference in the occurrence of hypercementosis was observed between maxillary and mandibular arches or between sides (p>0.05). conclusion: the prevalence of hypercementosis in a Saudi population was found to be 4.82 percent with respect to patients and 0.96 percent with respect to teeth. No significant propensity for gender, jaw and arch side was noted.

Diagnóstico, planificación del tratamiento y endodoncia de un primer premolar inferior con dos canales mediante tomografía computarizada 3D: reporte de un caso

El tratamiento endodóntico debe considerar que los dientes presentan una morfología del sistema de canales radiculares con alta variabilidad y complejidad. por lo tanto, el conocimiento acabado de la anatomía radicular y la planificación del procedimiento utilizando sistemas imagenológicos previos a la realización del tratamiento endodóntico, como la tomografía computarizada 3D (CBTC), mejoran el pronóstico, aumentando las probabilidades de éxito. el objetivo de este reporte es mostrar la secuencia de una resolución clínica de un primer premolar inferior (diente 4.4) con una anatomía compleja, utilizando el CBTC tanto en el diagnóstico como en la planificación.

Evaluation of miniscrew angulation in the posterior maxilla using cone-beam computed tomographic image

ABSTRACT Objective: This study aimed at evaluating whether changes in the insertion angle is a determining factor in the positioning of the miniscrews body in a region with larger interradicular space in the posterior maxilla. Methods: Analysis of 60 posterior maxillary quadrants were made using images obtained by means of cone-beam computed tomographic image (CBCT), with 0.076-mm voxel, which presented a real miniscrew inserted in the mesial region of the maxillary first molars, serving as reference point for the placement of the virtual miniscrews. Measurements of the distances between roots were made in three points on the body of the virtual miniscrews (A, B and C), at four different angulations, 70o, 60o, 50o and 40o (T1 to T4), in relation to the long axis of the second premolar. This evaluation was made in four groups, selected in accordance with the disposition of the roots of the second premolars and first molars: Group 1 (all types of roots), Group 2 (convergent roots), Group 3 (divergent roots) and Group 4 (parallel roots). Results: There were no statistically significant differences in the measurements of points A, B and C, at the different angles (70o, 60o, 50o and 40o) and in the different groups (p > 0.05). Conclusions: Changes in the insertion angle is not a determinant factor in the positioning of miniscrews body in regions with larger interradicular space in posterior maxilla.

RESUMO Objetivo: o presente estudo objetivou avaliar se alterações no ângulo de inserção do miniparafuso são um fator decisivo para a adaptação do corpo do parafuso em áreas com espaço inter-radicular aumentado, na região posterior da maxila. Métodos: foram realizadas análises em 60 quadrantes maxilares posteriores, a partir de imagens obtidas por tomografia computadorizada de feixe cônico (TCFC), com voxel de 0,076 mm, as quais apresentavam um miniparafuso real inserido na região mesial dos primeiros molares superiores, utilizado como ponto de referência para a inserção de miniparafusos virtuais. As distâncias inter-radiculares foram mensuradas utilizando-se três pontos marcados no corpo dos miniparafusos virtuais (A, B e C), inseridos com quatro angulações diferentes (70°, 60°, 50° e 40°) (T1 a T4) em relação ao longo eixo do segundo pré-molar. A avaliação foi realizada em quatro grupos, selecionados de acordo com a disposição das raízes dos segundos pré-molares e primeiros molares: Grupo 1 - contendo todos os tipos de raízes; Grupo 2 - raízes convergentes; Grupo 3 - raízes divergentes; e Grupo 4 - raízes paralelas. Resultados: não houve diferença estatisticamente significativa entre as medidas dos pontos A, B e C nas diferentes angulações (70°, 60°, 50° e 40°) ou entre os grupos (p > 0,05). Conclusões: alterações no ângulo de inserção dos miniparafusos não são um fator decisivo para a adaptação do corpo do parafuso, em áreas com espaço inter-radicular aumentado entre primeiro molar e segundo pré-molar superiores.